MB-CR-64 M-Bus to Modbus Converter suitable for up to 64 meters
MB-CR-64 is microcontroller-based bidirectional M-BUS Master converting M-Bus signal to Modbus RS-485 RTU and or Modbus TCP.
It can supply power to maximum of 64 m-bus slave devices. MB-CR-64 is used as a bridge in building and industrial networks where it is needed to read m-bus devices (tax meters and/or sensors) in Modbus based SCADA systems. It has output short circuit protection on m-bus side.
It is mounted on standard M36 DIN rail.
|Maximum number of M-BUS slave devices||64|
|Nominal output voltage (mark)||
35.5 VDC ± 1 V
|Power supply voltage||165 – 235 VAC (210 – 270 VDC)|
|Ambient temperature, operating||-20 – +50°C|
|Dimensions (H x W x D)||105 x 107 x 74 mm|
|IP protection class||IP20|
|RS-485 RTU Modbus interface baud rate||300, 1.2K, 2.4K, 4.8K, 9.6K, 19.2K, 38.4K bps|
|TCP Modbus DHCP||
Yes, can be turned on or off
|M-BUS cable length, max.||600 m|
|Distance between MMCR and farthest M-BUS slave||300 m|