Lunatone DALI-2 RM16 DIN Rail
Couldn't load pickup availability
The price shown is excluding VAT. If VAT is applicable, it will be calculated at checkout based on the shipment address.
Need help, call 01444 246 128
Lunatone DALI-2 RM16 I HS and DALI-2 RM16 IS HS provide a relay contact controllable via the DALI bus for inrush currents up to 350A. This allows various loads up to 3.6KW to be switched via DALI.
The purposeful switching in voltage zero crossings, enables an increase of the device lifetime.
The Models RM16-I-HS and RM16-IS-HS can reduce the standby energy consumption of DALI devices by turning off the power supply. This ‘standby function’ allows seamless control of DALI operating devices. “On” commands sent through group addressing or broadcast will activate the relay, and the RM16 repeats the DALI commands on the bus, ensuring that the now-powered operating devices respond correctly.
The DALI-2 RM16 IS HS can also be manually operated via a switch on the housing.
Power-up mode and system-failure settings can be configured using the DALI Cockpit PC Software.
1 normally open
zero cross switching
Specifications
Technical data
| Ambient temperature | -20°C to +60°C |
| Protection class | IP20 |
| Connection wire cross section | 2.5mm² |
| Mounting | DIN Rail |
Electrical data
| Supply | From DALI bus |
| Typ. current consumption DALI |
2.7mA |
| Input |
DALI |
| Relay output switch on/off voltage | 250V AC |
| Max. switching current | 8A (HS) / 16A (WE) |
| Max. nominal load | 1000VA (HS) / 2000VA (WE) |
| Switching method |
Zero cross switching
|
| Maximum switching frequency | 1Hz |
| Type of relay contact |
1 normally open
|
| Switching operations at nominal load - resistive |
>10^5 (HS) / >3*10^4 (WE)
|
Function
| Device type |
DALI Switching actuator |
| Configurable via DALI Cockpit | Yes |
Dimensions
| Length | 98mm |
| Width |
17.5mm |
| Height |
56mm |
| Colour | Grey |
