Lunatone DALI-2 RM16
Couldn't load pickup availability
The price shown is excluding VAT. If VAT is applicable, it will be calculated at checkout based on the shipment address.
Need help, call 01444 246 128
Lunatone DALI RM16 provides a relay contact that can be controlled via the DALI bus. In this way, loads without a DALI input can be easily integrated into a DALI circuit. Permanent loads up to 2kW can be switched via DALI commands. The purposeful switching in voltage zero crossings, enables an increase of the device lifetime. Power-up mode and system-failure settings can be configured using the DALI Cockpit PC Software.
zero cross switching
1 changeover
The product range of RM8 and RM16 also includes versions with integrated in-rush current limitation, various housing designs and variations with make contact or changeover contact:
Specifications
Technical data
| Ambient temperature | -20°C to +60°C |
| Protection class | IP20 |
| Connection wire cross section | 1.5mm² |
| Mounting | Back box |
Electrical data
| Supply | From DALI bus |
| Typ. current consumption DALI |
3.8mA |
| Input |
DALI |
| Relay output switch on/off voltage | 277V AC |
| Max. nominal load and circuit breaker | 3000VA and 16A max |
| Max. breaking current | 20A |
| Max. inrush current |
350A
|
| Max. continuous current | 2x8A |
| Switching method |
Zero cross switching
|
| Maximum switching frequency |
1Hz
|
| Type of relay contact |
1 normally open
|
| Switching operations at nominal load, resistive |
>10^5
|
Function
| Device type |
DALI Switching actuator |
| Configurable via DALI Cockpit | Yes |
Dimensions
| Length | 59mm |
| Width |
33mm |
| Height |
15mm |
| Colour | Grey |