Lunatone DALI-2 4xRM16 I HS
Couldn't load pickup availability
The price shown is excluding VAT. If VAT is applicable, it will be calculated at checkout based on the shipment address.
Need help, call 01444 246 128
Lunatone DALI-2 4xRM16 I HS provides 4 relay contacts, controllable via the DALI bus for inrush currents up to 350A. Thus, four loads without a DALI input and up to 3.6kW can easily be integrated into a DALI circuit and switched via DALI commands. Each channel has its own DALI address.
The purposeful switching in voltage zero crossings, enables an increase of the device lifetime.
Power-up mode and system-failure settings can be configured using the DALI Cockpit PC Software.
The DIN rail housing with 2DU is suitable for installation in control cabinets.
1 normally open
zero cross switching
The product range of RM8 and RM16 also includes various housing designs and models with changeover contacts.
Specifications
Technical data
| Ambient temperature | -20°C to +60°C |
| Protection class | IP20 |
| Connection wire cross section | 2.5mm² |
| Mounting | DIN Rail |
Electrical data
| Supply | From DALI bus |
| Typ. current consumption DALI |
5.5mA |
| Input |
DALI |
| Relay output switch on/off voltage | 250V AC |
| Max. nominal load and circuit breaker | 3000VA and 16A max |
| Max. breaking current |
20A
|
| Max. inrush current |
320A
|
| Max. continuous current | 16A |
| Switching method |
zero cross switching
|
| Maximum switching frequency |
1Hz
|
| Type of relay contact |
Normally open
|
| Switching operations at nominal load, resistive |
>10^5
|
| Number of used DALI addresses |
4
|
Function
| Device type |
DALI switching actuator with 4 relay contacts |
| Configurable via DALI Cockpit | Yes |
| Number of relays | 4 relay contacts |
Dimensions
| Length | 98mm |
| Width |
36mm |
| Height |
56mm |
| Colour | Grey |