Wireless M-BUS module for pulse output meters
The RFM-TXE module transmits via radio the lecture data of 1 or 2 meters equipped with pulse output device. This allows to transmit via Wireless M-BUS the data acquired by the meters that don’t allow the installation of the integrated radio module solution.
The module can be connected to any meter equipped with pulse output, of any brand, size and version. The configuration and the reading of the radio signal should be performed with the RFM-RX2 receiver linked to a PC.
Technical Features
Radio interface | W-Mbus EN13757-4 @868 MHz ≤ 10 mW |
Signal coverage |
300 meters** |
Supported medium | water, heat/cool, electric energy, gas |
Power supply | Lithium battery 3.6V |
Battery life | +10 years* |
Size (l x p x h) | 30 x 6 7x 67 mm |
Weight | 43 g |
Configuration |
Wireless using RFM-RX2 and dedicated software |
Working temperature | from +1°C to +55°C |
Protection class | IP65 |
Transmitted data | Volume (consumption), historical values, battery status, alarms |
Pulse input | N°2 inputs. Connectable to pulse emitter systems (reed and Open Collector) |