Lunatone DALI RM16 HS WE provides a relay contact that can be controlled via the DALI bus. In this way, loads without a DALI input can be easily integrated into a DALI circuit. Permanent loads up to 2kW can be switched via DALI commands. The purposeful switching in voltage zero crossings, enables an increase of the device lifetime. Power-up mode and system-failure settings can be configured using the DALI Cockpit PC Software.
zero cross switching
1 changeover
Specifications
Technical data
| Ambient temperature | -20°C to +60°C |
| Protection class | IP20 |
| Connection wire cross section | 2.5mm² |
| Mounting | DIN Rail |
Electrical data
| Supply | From DALI bus |
| Typ. current consumption DALI |
2.7mA |
| Input |
DALI |
| Relay output switch on/off voltage | 250V AC |
| Max. nominal load | 2000VA and 12A Max |
| Switching method |
Zero cross switching
|
| Maximum switching frequency | 1Hz |
| Type of relay contact |
1 changeover
|
| Switching operations at nominal load - resistive |
>10^5 (HS) / >3*10^4 (WE)
|
Function
| Device type |
DALI Switching actuator |
| Configurable via DALI Cockpit | Yes |
Dimensions
| Length | 98mm |
| Width |
17.5mm |
| Height |
56mm |
| Colour | Grey |