Lunatone Wireless 0-10V PWM interface with integrated 8A relay. The set consists of a transceiver and a receiver and is used to wirelessly control lights with 0-10V / 1-10V / PWM operating devices. The transmitter is connected to and powered by the DALI bus (3.8mA). The receiver has a 0-10V PWM output and a relay function and is powered by mains voltage. The wDALI RM8 0-10V enables the wireless integration of electrical devices such as floor lamps and outdoor lighting into a DALI system. Under optimal conditions the reception range is 300m, in buildings usually 10-20m.
Specifications- wDALI RM8
Technical data
Ambient temperature
0 ° C to + 45 ° C
Protection class
IP20
Connection Wires cross section
Max. 1.5mm²
Assembly
Can installation
Electrical data
Supply
210-250V AC / 50-60Hz
Output
0-100% PWM (16bit, 488Hz), current sink 1mA
Nominal load
1000VA
Max. Switching current
8A
Max. Inrush current peaks
80A
Relay contact
1 on / off, max. 30000 switching cycles at nominal load resistive, max. Switching frequency 1Hz
Frequency band
2.4Ghz
Specifications- wDALI Transceiver
Technical data
Ambient temperature
-10 ° C to + 50 ° C
Protection class
IP20
Connection wires cross section
Max.1.5mm²
Assembly
Can installation
Electrical data
Supply
From DALI Bus
typ. current consumption
3.8mA
Output
DALI
Function
programmable, Power On refers to the return of the bus supply
Function
Device Type
wDALI Control gear
Dimensions
Length, Width, Height
59mm,33mm,15mm
Colour
Grey
Downloads
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.